Today's technology is constantly developing, and our home appliances are also constantly being upgraded. Whether it’s a TV, an air conditioner, or a washing machine, you don’t need to use your hands to operate it now. Every electrical appliance has a remote control. We lie there and move our fingers, and everything is OK. The same is true for home appliances and some mechanized equipment. The same is true for remote control excavators, but there is often such a problem that there is no response after using it. What's going on?
The remote control excavator does not start, generally the motor does not start. Can be divided into two reasons:
1. Whether the AC contactor is firmly connected.
2. Whether the voltage is stable. Solution: First check whether the AC contactor and the voltage connector are connected properly, and measure with a voltmeter.
The remote control excavator does not start the solution:
1. Press and hold the SET button on the remote control first, turn on the power switch of the remote control, and the LED light on the remote control will turn red and flash.
2. Press and hold the LINK button on the receiver and turn on the receiving power switch, the LED lights of the receiver and the remote control will turn green and stay on. Then the frequency pairing is successful. The remote control is a wireless transmitting device, which encodes the button information through modern digital coding technology, emits light waves through infrared diodes, and converts the received infrared signals into electrical signals through the infrared receiver of the receiver, and then enters the processor Decode and demodulate the corresponding instructions to achieve the operation requirements for controlling the set-top box and other equipment to complete.
The above are the reasons and operations we know about how the remote control excavator does not respond to the remote control. If you still don’t understand something, you can call us.
