(1) The operation shall be carried out in strict accordance with the operating procedures and driving essentials, and the "tooth beating" during gear shifting shall be avoided as far as possible to reduce the wear of the gear pair.
(2) Strictly implement the maintenance system and strengthen the maintenance of gear shifting device. When the linkage of the gear shifting device is not connected properly, it shall be adjusted in time to ensure good performance of the gear shifting device.
(3) Pay attention to the repair and maintenance of the self-locking mechanism. For the positioning steel ball, spring and fork shaft whose positioning function is reduced or has lost the positioning efficiency, they should be repaired or replaced in time to make the self-locking performance of the self-locking mechanism in a good state.
(4) When assembling the transmission, the operation shall be carried out in strict accordance with the operating procedures to ensure that all parts of the transmission are correctly adjusted and properly tightened. When going downhill on a large road surface, the driver should strictly follow the main points of the downhill action and must not violate the rules.
